Cyberduck Mountain Duck CLI

#5179 closed defect (duplicate)

Failed connection

Reported by: richard.morrison Owned by: Richard Morrison
Priority: normal Milestone: 3.7
Component: ftp Version: 3.6.1
Severity: normal Keywords:
Cc: Architecture: Intel
Platform: Mac OS X 10.5

Description

I have used Cyberduck for the last several months for uploading to an FTP site. Unfortunately, after upgrading to v3.6 I am unable to open a connection. I can open the site but I am unable to upload to it. The FTP error message I get reads: "I won't open a connection to 192.168.1.5 (only to 76.169.236.168)." I haven't changed a thing regarding my router or computer software settings, only upgraded Cyberduck. Now that I have lost the old version, I can't find any prior settings. I just upgraded to v3.6.1 today, but still no luck. I need help.

Attachments (1)

Cyberduck message.png (77.9 KB) - added by richard.morrison on Sep 10, 2010 at 6:42:50 PM.

Download all attachments as: .zip

Change History (13)

Changed on Sep 10, 2010 at 6:42:50 PM by richard.morrison

comment:1 in reply to: ↑ description Changed on Sep 10, 2010 at 9:36:31 PM by quack12

Replying to richard.morrison:

I have used Cyberduck for the last several months for uploading to an FTP site. Unfortunately, after upgrading to v3.6 I am unable to open a connection. I can open the site but I am unable to upload to it. The FTP error message I get reads: "I won't open a connection to 192.168.1.5 (only to 76.169.236.168)." I haven't changed a thing regarding my router or computer software settings, only upgraded Cyberduck. Now that I have lost the old version, I can't find any prior settings. I just upgraded to v3.6.1 today, but still no luck. I need help.

I am having the identical problem under the same circumstances. Here is the error I get. I am sorry I uploaded 3.6.1 Previous versions were terrific.

Please help us all with this problem, or tell us how to revert back to the version that works

Thanks,

Bill

comment:2 Changed on Sep 10, 2010 at 9:41:12 PM by quack12

I forgot to show the error message I got. It is:

FTP Error: Upload Failed
I won't open a connection to xxx.xxx.x.xx (only to yyy.yy.yy.yy)

The xxx.xxx.x.xx IP is my unique router address

The is our DSL assigned Static Ip address

These conditions are the same as Richards's

Bill

Last edited on Sep 11, 2010 at 9:35:48 PM by dkocher (previous) (diff)

comment:3 Changed on Sep 10, 2010 at 10:09:46 PM by dkocher

  • Component changed from core to ftp

The error message indicates that you are trying to use Active (PORT) connect mode whereas you are behind a NAT where such a configuration is not possible. Altough we should fallback to Passive (PASV) connect mode, you might need to choose this manually from the bookmark settings. Please post the full transcript from the log drawer of your connection attempt.

comment:4 Changed on Sep 10, 2010 at 10:11:43 PM by dkocher

  • Resolution set to duplicate
  • Status changed from new to closed

Duplicate for #5168

comment:5 Changed on Sep 10, 2010 at 10:34:27 PM by quack12

Please forgive me, but I do not know what the solution is!

Where in Cyberduck do I find the bookmark settings to change to PASV?

The configuration I have been using with Cyberduck was very possible for months, and now you tell me it is not possible, because I uploaded the most recent update that I was told to do. I can only conclude that the 3.6.1 update caused the "Not Possible" problem.

How can you close this when you have not solved it, and if you have solved it why do you want my logs?

May I ask, Can you give us instructions to complete the solution? There are several people waiting.

Thank you.

PS I just changed the bookmark settings for the only host that does not work to PASV in Bookmark/edit/more options/connect mode.

The same error problem comes up again.

Please note that I used Cyberduck to FTP to 2 different hosts. One uploads fine the other does not. I was asked by the new 3.6.1 Cyberduck when I tried to connect to previous hosts the following:

Unsecured FTP connection
The server supports encrypted connections. Do you want to switch to FTP-SSL?

Don’t show again   Continue   Change

For the host that still works I clicked on "Continue", and have no problems. For the host that will not let me upload and gives the error messages I sent you, I clicked on "Change" Then the icon for the host where I clicked "Change" now has a small icon in the lower left corner, but the other one does not.

Last edited on Sep 11, 2010 at 9:36:19 PM by dkocher (previous) (diff)

comment:6 Changed on Sep 10, 2010 at 10:41:12 PM by richard.morrison

I found that clicking on Open Connection at the top left corner opens a window which at the bottom under More Options is a Connect Mode: Default. You can switch to passive mode there. It worked for me. Good luck!

Did NOT work for me.

Last edited on Sep 10, 2010 at 10:51:19 PM by quack12 (previous) (diff)

comment:7 follow-up: Changed on Sep 10, 2010 at 10:59:19 PM by quack12

Tried setting it up with PASV as you said worked and it still fails, more than once.

Note the small padlock on the icon for the host that does not work. Why is it there and not on the other host, and it appeared when I hit "Change" as described above

comment:8 Changed on Sep 10, 2010 at 11:04:20 PM by quack12

PS I just changed the bookmark settings for the only host that does not work to PASV in Bookmark/edit/more options/connect mode.

The same error problem comes up again.

Please note that I used Cyberduck to FTP to 2 different hosts. One uploads fine the other does not. I was asked by the new 3.6.1 Cyberduck when I tried to connect to previous hosts the following:

Unsecured FTP connection The server supports encrypted connections. Do you want to switch to FTP-SSL?

"Don’t show again" "Continue" "Change"

For the host that still works I clicked on "Continue", and have no problems. For the host that will not let me upload and gives the error messages I sent you, I clicked on "Change" Then the icon for the host where I clicked "Change" now has a small icon in the lower left corner, but the other one does not.

comment:9 in reply to: ↑ 7 Changed on Sep 11, 2010 at 9:36:53 PM by dkocher

Replying to quack12:

Tried setting it up with PASV as you said worked and it still fails, more than once.

Note the small padlock on the icon for the host that does not work. Why is it there and not on the other host, and it appeared when I hit "Change" as described above

You can change the protocl back to plain FTP in the bookmark setting. Choose FTP (File Transfer Protocol) instead of FTP-SSL (Explicit AUTH TLS)

comment:10 follow-up: Changed on Sep 16, 2010 at 1:16:24 PM by dkocher

  • Milestone set to 3.6.2

comment:11 in reply to: ↑ 10 Changed on Sep 22, 2010 at 6:29:29 PM by standoutreels

Replying to dkocher: Hi, I'm having the exact same problem outlined here. Can you be more specific on how to change back to FTP in the bookmark setting? When I click on Bookmarks at the top menu, the <edit bookmarks> is greyed out so I can not choose it. Where exactly in the menu is this option to change back to FTP instead of FTP-SSL? Thank you.

comment:12 Changed on Sep 22, 2010 at 6:45:11 PM by standoutreels

Never mind, I figured it out. If I used the bookmark icon instead of the menu at top it led me to the FTP change option. Thanks!

Note: See TracTickets for help on using tickets.
swiss made software